F.A.O KINGHORN

[Bignorm]

hey kinghorn i found out about the exhaust you were on the phone to danny and he gave you a price for the middle pipe that was cost price the best i can do also i spoke to a tech and he said you could easy cut it and fit it on you only get a middle pipe if its from the works kit any other problems give me a shout

[KINGHORN]

NORMAN you sold me the exhaust telling me it was a full JCW system and everything included was all i needed to fit to my mini, now your telling me i need to spend another 150 quid to get it to fit in the designed way

[Bignorm]

WAIT JUST A MINIUTE NOT ONCE DID I SAY IT WAS A FULL EXHAUST FROM THE DOWN PIPE AS I SAID I SPOKE TO A TECH AND HE SAID YOU SHOULD CUT IT ITS NOT HARD IT WILL ONLY TAKE 5 MINS I TOLD YOU ON THE PHONE IT WAS 2 SILENCERS AND TAIL PIPES THATS WHAT YOU GOT WAS IT NOT

[KINGHORN]

oh while we are at it the tips dont fit either,

[Bignorm]

yeah so you said look you want to try and slag me phone me or come and see me dont try and slag me on NMS THANKS ILL SEND YOU THE FITTING INSTRUCTIONS IF YOU ARE FINDING IT HARD

[KINGHORN]

i did fone, i have been annoyed about this since last tuesday, i have been pacient i have made the phone calls, it wasnt me that posted on here in the first place.

[Big Col]

Translation : You started it!!!! ;):D:clown:

[Bignorm]

ha ha well sorry for taking a holliday must remember not to take any in future <just remember what you paid for it that was cheap as fcuk and i never said it was a full exhaust

[KINGHORN]

right, so, to fit it i need to cut my original, what about the tips how do i fit them, i know it was cheap but, it is kinda annoying when u get something and it dont fit

[Bignorm]

yeah i know where u are coming from but it does fit there is only one type of end piece for the exhaust and thats the ones you have got and yeah you need to cut the exhaust

[KINGHORN]

OK.

[KINGHORN]

checked tips again last night and there is no way they are gonna go one il take some pics later today to show ya the gap

[Gismo]

Phew :p how do you guys know what each other is saying :evil: no punctuation at all to show where one sentence stops and starts etc :p;):I

[Bignorm]

ok

[Mini Me]

(get's down from the fence)......play nice guy's ! :p.
Let's get it sorted out, eh !

[T6 KFR]

Yeah this is supposed to be a friendly site to discuss what we all love - Mini's.

This is the second thread in 1 week ive seen slight disagreements could i say:mad:. Not Nice at all.

How about you both go on a wee run together with your newly fitted exhaust;)

[Big Col]

Haw minime, T6 shoosh! I wanna see a fight! I've got a tenner on Kinghorn since he'll use the exhaust as a chib! Any takers? ;):D

[Bignorm]

ha ha i am always friendly

[Gismo]

quote:Originally posted by Big Col
Haw minime, T6 shoosh! I wanna see a fight! I've got a tenner on Kinghorn since he'll use the exhaust as a chib!
I've got a five that says the exhaust tips dinnae fit :p

[Bignorm]

well we will just wait and see then if they do u will hear me and if they dont i will just need to get it sorted

[KINGHORN]

http://www.mini2.com/gallery/personal/22158/70343.jpg the

circled area is where the grub screw does not come into contact with the pipe

[Bignorm]

ok mate will need to speak to a tech see if he knows of any problems like that

[Bignorm]

the part number of the ones you have got should be 18101489603

[KINGHORN]

IM OFFSHORE NOW MATE BUT WILL GET SOMEONE TO CHECK ASAP

[monkimagic]

Phew, I see ya that tenner Bonnie on Roadster;)

[Gismo]

quote:Originally posted by monkimagic
Phew, I see ya that tenner Bonnie on Roadster ;)
I think you'll see it was a fiver i was waging :approve: Big Col has a tenner on a fight though ;)

[Wul]

Is it just me or is a longer grub screw the solution? :clown:

[Big Col]

LOL! That's just what I thought Wul.

[Gismo]

quote:Originally posted by Wul
Is it just me or is a longer grub screw the solution? :clown:
I would have said that too, but, the picture shows too much of a gap, a longer screw would do the job, but the tip would sit squint

[Burple]

quote:
I would have said that too, but, the picture shows too much of a gap, a longer screw would do the job, but the tip would sit squint


Unless you can get a washer or summat glued in the other side of the pipe to even it up a bit?

:clown:

[GAJ]

Pack it with tinfoil!

[Gismo]

Gasp, but, but, but, but, these are JCW items :eek: they are perfect and the ONLY way to keep your warranty ;), now, if they had a grub screw either side, or indeed at every 90 degree position :approve:

[KINGHORN]

woooo hud on a min

im not goon pack it or glue nothing, theses should fit correctly, otherwise i wouldhave went out and bought an aftermarket kit which i could have had on by now, but i wanted the JCW because of the warenty issue,

[Burple]

quote:Originally posted by GAJ

Pack it with tinfoil!


Lol...

Spot the one-time Classic Mini Owner!!! :p:p:p

[Mini Me]

quote:Originally posted by KINGHORN

woooo hud on a min

im not goon pack it or glue nothing, theses should fit correctly, otherwise i wouldhave went out and bought an aftermarket kit which i could have had on by now, but i wanted the JCW because of the warenty issue,


Right that's it, you aint glueing nout :eek:,am gettin this sorted......... :blackeye:;)

[Big Col]

quote:Originally posted by minime
Right that's it, you aint glueing nout :eek:,am gettin this sorted......... :blackeye:;)


<grins> Thar we go. :D

[Wul]

At last the result he was after! :p

[KINGHORN]

quote:Originally posted by minime


quote:Originally posted by KINGHORN

woooo hud on a min

im not goon pack it or glue nothing, theses should fit correctly, otherwise i wouldhave went out and bought an aftermarket kit which i could have had on by now, but i wanted the JCW because of the warenty issue,


Right that's it, you aint glueing nout :eek:,am gettin this sorted......... :blackeye:;)


THANK YOU SO MUCH IAN :)

[SpongeBob]

Listen To Mini Me,Big Hard Man Mare chins than a Chinese Fone Book

[monkimagic]

quote:Originally posted by SpongeBob

Listen To Mini Me,Big Hard Man Mare chins than a Chinese Fone Book


?

[Mini Me]

quote:Originally posted by SpongeBob

Listen To Mini Me,Big Hard Man Mare chins than a Chinese Fone Book


and you are :question: apart from ignorant :mad:

[SpongeBob]

quote:Originally posted by minime


quote:Originally posted by SpongeBob

Listen To Mini Me,Big Hard Man Mare chins than a Chinese Fone Book


and you are :question: apart from ignorant :mad:


your secret lover, hunny!

[Mini Me]

there's alway's one.........Spongebob(mr mcnab by any chance)

[KINGHORN]

THATS WHAT I THOUGHT ian, think this bloke dont like u some how

[Big Col]

quote:Originally posted by minime

there's alway's one.........Spongebob(mr mcnab by any chance)


Actually Iain there's two bollocks to a bawbag.

[SpongeBob]

quote:Originally posted by minime

there's alway's one.........Spongebob(mr mcnab by any chance)


its a fair cop,still love you though

[sh@z]

what a retard...

[KINGHORN]

quote:Originally posted by roaster21

the part number of the ones you have got should be 18101489603



the part number i have for the tips is 82120395484

[monkimagic]

Who is this fool ? we will find out soon, the moderators will be able to track his IP address, get his details. when this is done they can block him and his foolish ways.:D

[MartinSullivan]

The part number Roaster gave is Item 15 on this drawing (http://www.realoem.com/bmw/showparts.do?model=RE32&mospid=48020&btnr=18_0489&hg=18&fg=20&hl=31), which appears to be the standard S exhaust tip. The JCW tips as you said Kinghorn are Item 10 on this drawing (http://www.realoem.com/bmw/showparts.do?model=RE32&mospid=48020&btnr=11_3817&hg=11&fg=95&hl=16).

[Mini Me]

Are the not stamped with the jcw logo ?, cos they can't have supplied std S ones !!!<he hopes>

[MartinSullivan]

quote:Originally posted by minime

Are the not stamped with the jcw logo ?, cos they can't have supplied std S ones !!!<he hopes>



It would sort of explain part of the problem - as I believe from reading on Mini2 that the JCW exhaust is a smaller bore than the standard S exhaust - so the tips would be too big. Only time will tell I guess ;)

[KINGHORN]

Yip all stamped with JCW logo, need item 9 on the second drawing aswell

[KINGHORN]

can you send the new ones up asap norman

[Bignorm]

WILL DO MATE