PDA

View Full Version : Fitting airtec fmic on r56



Ss82
5th May 2016, 08:46 AM
Reading stories bout some fmic's being abit a nightmare to fit weather it being too far forward so not being able to get the lower grill back on due to aircon rad being there etc

How easy Is the airtec to fit? Is there much trimming needed?

Cheers

MINI William
5th May 2016, 10:02 AM
Never had a bit bother with the 2 airtecs we have fitted. Only thing you need to watch for depending on how new a car you get is the front crash bar that is a pain

Eddie_JCW
5th May 2016, 10:03 AM
I'm not sure on an S but the Airtec FMIC I had on my 2013 JCW went on rather easily with it being a 2013 the most difficult part was getting the front crash bar loosened enough to get it behind but I believe only the 2013-on R56's have that problem because the rest don't have a lower crash bar.

Sent from my SM-G935F using Tapatalk

Ss82
5th May 2016, 10:07 AM
Ill b goin for a n14 so might not have hassle then lol will be a 08/09 hopefully

badwolf340
5th May 2016, 10:14 AM
never needed any trimming but as said crash bar is a pain

Ss82
5th May 2016, 10:23 AM
Nice to hear no trimming needed last time I did that the the stanley slipped....nice wee trip to a&e after I finished for some stitches haha

Take it the bolts r normally seized solid on the crash bar?

Eddie_JCW
5th May 2016, 11:41 AM
Take it the bolts r normally seized solid on the crash bar?

No, just an absolute pain to get to

Sent from my SM-G935F using Tapatalk

Ss82
5th May 2016, 11:43 AM
The bumper easy enuf to take off tho? Or does things snap easily

Eddie_JCW
5th May 2016, 11:44 AM
Pretty straight forward, you might snap a couple of the push in clips but take your time and you'll be ok.

Sent from my SM-G935F using Tapatalk

Ss82
5th May 2016, 02:57 PM
Nice one :)
Cheers for the advise :)