PDA

View Full Version : Changed fuel filter but wont fire up



arrolman
29th September 2015, 11:18 PM
Hi,

Changed the fuel filter today, was beyond knackered, never a lifetime thing. Anyway, put all back together, tried to start it but wont fire up, can hear pump working and starter going but theres obviously no fuel getting pulled through. Fuel is coming out the rail no problems after I bleed the air out. Is there a manual pump on the fuel pump side? All the instructions I have read say it should fire back up after 15 seconds or so of cranking. Got half a tank in it, filter is brimmed with fuel. Anyone any ideas before I strip the full unit out the tank? Car is R50 model.

Cheers,
Iain

Eddie_JCW
30th September 2015, 12:21 AM
Petrol or diesel?

Eddie_JCW
30th September 2015, 12:27 AM
Check the inertia switch, it should be at the rear of the engine bay on the passenger side looks like this. http://images.tapatalk-cdn.com/15/09/29/f86920220da14fffc8e9296e1db04e9a.jpg

arrolman
30th September 2015, 08:34 AM
Petrol 1.6, cheers for the heads up on the inertia, will have a look at it once im home.

Cheers,
Iain

arrolman
1st October 2015, 08:37 PM
Sorted!! Seal on bottom of housong wasnt seated properly, easy fix for a change.

Cheers,
Iain

bpirie1000
2nd October 2015, 08:11 AM
Well Sussed out....

Craig
2nd October 2015, 12:45 PM
Well done Iain [emoji2]


Sent from my iPhone using Tapatalk

MINI William
2nd October 2015, 12:51 PM
Pleased you got it fixed :thumbs up: