PDA

View Full Version : Aero Grill Fitment?!



anderson-graham
16th January 2011, 10:41 PM
Hi, can anyone tell me how I go about removing my now obsolete bonnet grill, in order to allow me to fit my new Aero grill?! All of the retaining nuts on the back of the current grill seem to just spin and will not back off! I would prefer if poss to remove the old grill without braking it, please help.
Am I missing something?

Many thanks, Graham.

john
16th January 2011, 10:51 PM
Stick a small screwdriver behind the nut and prise it off at the same time as turning it and it will unscrew.

GCA3N
16th January 2011, 11:04 PM
Stick a small screwdriver behind the nut and prise it off at the same time as turning it and it will unscrew.

Do this or remove using pliers pulling as you turn the nut.

Gismo
17th January 2011, 03:04 PM
Do this or remove using pliers pulling as you turn the nut.This is the way i did it :thumbs up:
Basically, you need to "pull" the nut at the same time as turning anti clockwise

anderson-graham
23rd January 2011, 05:31 PM
Super Guys, thanks for your input, I've successfully managed to remove the old grill. I did snap one or two of the prongs however, oops!!!

GCA3N
23rd January 2011, 05:45 PM
Super Guys, thanks for your input, I've successfully managed to remove the old grill. I did snap one or two of the prongs however, oops!!!

It's easily Done, glad you got it off.