Removing side indicators

[lowrider]

Buying a set of clear indicators tomorrow and was wondering if anyone could advise me on the easiest way to remove the original ones ( I'm sure you lot must know the easiest way :thumbs up:) I was thinking about a flat head and prizing them out ?

Thanks, Andrew.

[GCA3N]

Its a couple of years ago since i done this if i remember its just as you say, dead easy

[mikeythemini]

1st or 2nd gen?

[RyanK]

aye thats how I do it if its a first gen you have. flat head to the side nearest drivers door, and it should pop out with a little tug

[Craig]

if it's first gen, then the easiest way is to open the bonnet and push the back end of the side repeater (nearest the bulb) out from the inside. Then it just sides out towards the back of the car... :yes nod:

if 2nd gen, then on the outside, just grap hold of the side repeater and push it towards the front of the car, it should then just pop out. :thumbs up:

hope this helps.:yes nod:

the back of the bulb holder just twists out, then just pop out the lens with a screw driver...

[Crombers]

if it's first gen, then the easiest way is to open the bonnet and push the back end of the side repeater (nearest the bulb) out from the inside. Then it just sides out towards the back of the car... :yes nod:

if 2nd gen, then on the outside, just grap hold of the side repeater and push it towards the front of the car, it should then just pop out. :thumbs up:

hope this helps.:yes nod:

the back of the bulb holder just twists out, then just pop out the lens with a screw driver...

C'Mon the Pit Crew :thumbs up:

[lowrider]

Easy job, thanks. My first mod. completed ha ha !
Looks better than the orange jobbies :yes nod:

Andrew.

[Craig]

Easy job, thanks. My first mod. completed ha ha !
Looks better than the orange jobbies :yes nod:

Andrew.

Happy to Help ;)