Snow Foam & New Exhaust (pics)

[Bazthemod]

Snowfoam comes highly recommended not only does it do a good job its loads of fun too! :D

Ohh and pics of new playmini exhaust aswell!

Excuse the awful winter wheels, cant wait to get my R105's on again :(

http://file041b.bebo.com/11/large/2008/02/06/14/1799036806a6810570231l.jpg
http://file041b.bebo.com/11/large/2008/02/06/14/1799036806a6810570332l.jpg
http://file041b.bebo.com/11/large/2008/02/06/14/1799036806a6810570409l.jpg
http://file041b.bebo.com/11/large/2008/02/06/14/1799036806a6810570500l.jpg
http://file041b.bebo.com/11/large/2008/02/06/14/1799036806a6810570590l.jpg

[AeroJonny]

that looks wicked Baz, does the foam just strip all the dirt off the car without the need for a sponge??

[Burple]

Nice one ickle dude! Something else for you to keep shiny now! :cool::D

[vintageb3]

Baz...I use snow foam as well from time to time...

I read somewhere that snow foam can strip wax if over used...so get some advice if you plan to use it every wash.

I use ordinary car shampoo in my foam gun....sometimes add a wee drop snow foam as well...

Hope this helps!

mark

[Craig]

looks great Baz. :D Just remember to keep that exhaust shiny.... inside and out. ;) :)

[AndyP & Lenore]

Very nice Baz. Very shiny.:D :D :cool: :cool:

A.:D

[Bazthemod]

Well its not designed to replace a washmit and bucket but if you are after a quick touchless wash it does a fairly good job on its own.

It is mainly designed to take the bulk of dirt off the car - spray on foam and leave to dwell for 5-10 mins... as the foam runs off you can see it taking the dirt with it.

Therfore it should reduce swirls when washing with the mit.

Re wax stripping i havent noticed any difference, still beads nicely after washing when it starts pissing down :mad:

I wax my car once a month anyway as i love it being glossed up, you will rarely see my car dirty haha :cool:

[AndyP & Lenore]

So what is it you actually use to make the snow effect? I know you use the Snowfoam product, but how do you get it on the car?

Baz it looks like you have a Karcher pressure washer. We have one too... Is it an attachment for that?

And can you just use your normal shampoo to get the snow effect?

A.:D

[Bazthemod]

Yeh you need a foam lance but not the karcher one this is mine...

http://www.cleanyourcar.co.uk/washing-amp-drying/foam-lance-karcher-fitting/prod_371.html

I dare say you could use normal carwash but im unsure of how much it would foam :confused:

With snowfoam you use 2-3mm in bottom of the container and fill rest with water. You can also adjust how much foam you want :p

Hope that helps :)

[RyanK]

Looks Cool Baz.

Going to need to hook myself up with some of this stuff. Its to cold for the buckets and Mit!

[ianking]

If you want a shampoo that foams up lovely in a foam gun then either Chemical Guys Maxi Suds or Mequiars Hyper Wash. I get the megs stuff from Polished Bliss in Aberdeen.